Natural Oil Woodstain

Osmo Natural Oil Woodstain is perfect for all exterior woods, including doors, windows & windowsills, carports, timber cladding, balcony, wooden decking, screens & smooth fences, pergolas, summer houses and garden furniture. An all-in-one translucent wood stain that colours, protects, feeds and enhances exterior wood and joinery. All colour shades can be mixed with each other to create any number of alternative colours

• Number of recommended coats: 2
• Coverage: Up to 26m2 per litre
• Drying time: 12 hours
• Sizes available: 750ml, 2.5L

Natural Oil Woodstain (701) Clear offers no UV protection and is therefore not recommended for wooden surfaces exposed to strong sunlight.

Ensure surfaces to be treated with Osmo Woodstain are clean, dry and frost-free prior to application (moisture content max. 20°C).

• Existing oil finishes should be lightly sanded and cleaned before application
• Existing coatings such as paint and varnish must be fully removed by sanding or stripping back to bare wood
• Remove sanding dust thoroughly from the surface with a brush or vacuum cleaner before application
• Use white spirit to degrease and remove surface contaminates if required
• Any traces of green growth or mould should be treated and removed with Osmo Guard Clean
• Fill any holes or gaps with a suitable wood filler
• Revive any greyed or sun damaged wood with Osmo Wood Reviver Gel
• Any end grain can be sealed with Osmo End Grain Sealing Wax
• If additional protection against blue stain, rot and insects is desired, pre-treat the wood, if possible on all sides, with Osmo WR Base Coat

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Stir thoroughly before and periodically during application.

1. Apply Osmo wood stain thinly and evenly along the wood grain with an Soft Top Brush or Premium Microfibre Roller and spread well
2. Work the oil into the surface grain of the wood
3. If possible, apply the first coat to all sides of the wood before installation to offer the best all-round protection
4. Wipe off any excess oil from the surface of the wood with a clean, lint-free cloth
5. Allow the first coat to dry for 4-6 hours
6. Apply a second coat using the same method as the first

Please Note: Rough sawn timber is more absorbent, meaning coverage per litre will be greatly reduced.

The dried surface is initially satin-gloss at first and is afterwards satin. The transparent colour tone of the finish will be influenced by the wood's natural colour, causing the result to deviate from the colour shown on the colour chart. Lightly pigmented (coloured) transparent finishes have little protection against UV influences and are therefore not recommended for surfaces prone to strong sunlight.

• To increase the durability of the finish, we recommend applying a top coat of Osmo UV Protection Oil Extra (420)
• For the white Osmo Natural Oil Woodstain finish (product code 900), use Osmo UV Protection Oil Extra (429) as a top coat as this will retain the white finish. Using the standard clear UV protection oil (420) on top of the white 900 may result in a creamy or 'off-white' finish

• Regular Cleaning: For the regular cleaning of exterior wooden surfaces, use Osmo Exterior Spray Cleaner (8027)

Maintenance

• If surfaces show signs of wear or a loss of weather resistance over time, simply clean and add a maintenance coat of Osmo Natural Oil Woodstain to the existing finish.