1. BEGIN BY MEASURING THE THE FENCE RUN
For a fence run between two points, in a straight line across level ground: mark the start and end points of the run by driving short stakes/pegs into the ground or marking the ground and measure between the two points.
For a fence run across two points, with changes in direction across level ground: mark the start and end of the run by driving short stakes/pegs into the ground or marking the ground. Next, mark any changes in direction and measure between each marked point. Treat the distance between each point as an individual run.
For a fence run between two points, in a straight line across sloping ground: mark the start and end points of the run by driving long stakes/pegs into the ground. Next, run a plumb line by fixing a length of string horizontally between the two markers, ensure the string is taut then ‘true it’ using a spirit level. Finally, measure the horizontal distance between the two markers using the string as the guide.
2. MAKE YOUR POST SELECTION
Decide on the type of post you’d like to use then select the length of post required for the fence height including the gravel board, and any topping/trellis you want to incorporate above the fence and between the posts.
A post is required to support the ends of each fence panel. Fence post types include:
- Intermediate Post (use to join panels along the fence run)
- Corner Post (use at the end of the run or to create a right angle)
- End Post (at the end of a run where only one fence panel needs to be fixed – may also be used as wall plates to fix the fence panel to a wall)
3. CALCULATE THE NUMBER OF PANELS REQUIRED FOR YOUR FENCE RUN
Use the overall measurement you have taken for each fence run and deduct the sectional dimensions of the selected posts required. Divide this dimension by the standard width the fence panels (ie. 1.8m / 1800mm) to give you the number of full panels required, for example:
18m / 1.87m = 9.62 fence panels
Where there is a requirement for a special size to fit between posts, these may be ordered as a ‘special’ or some cases you can order our Panel Width Cut-Down Kits to suit the fence style selected.
For Further help, please contact us.
